有道词典

Based on the analysis of some seismic test method, a new tentative idea about "Hybrid test" is proposed.

在分析原有几种抗震试验方法的基础上,提出了一种新的“混合试验方法”的设想。

41kb

Wells said BP is continuing to test the pressure of the well daily and is using seismic tests to make sure there are no leaks from the seabed.

维尔斯说,BP公司还在每天继续测试油井压力,并利用地震试验来保证海床不发生泄漏。

43kb

Furthermore, the seismic performance indexes and the experimental methodology of the seismic test on curtain walls were advised for further research.

此外,对建筑幕墙抗震性能考核指标和方法提出建议,供进一步研究参考。

29kb

This article uses the same test application as the earlier article, a seismic data retrieval service.

31kb

This article also USES the same test application as the earlier articles, a seismic data retrieval service.

33kb

During the pressure test, BP engineers are continuing to monitor the well with seismic, sonar and other equipment.

英国石油公司的工程人员在压力测试过程中,正继续用地震检波器、声纳探察仪等设备来监看油井状况。

30kb

The performance comparisons use the same test code as earlier articles, a seismic data retrieval service.

29kb

Test results of synthetic data and actual seismic data have verified the feasibility of this method.

理论模型和实际地震资料验证了该方法的可行性。

48kb

Test results show that the rolling base isolation is very effective for reduction of seismic response of superstructure in comparison with the fixed base structure.

结果表明,与基础固定结构相比,隔震体系对上部结构的地震反应具有明显的隔震效果。

42kb

In this paper, research on seismic response of tall flexible tower structures is performed through shaking table test and finite element analysis.

本文从振动台试验和有限元计算等方面对高耸结构的地震响规律应做了较全面的研究。

49kb

It can analyze DPG signal, self-defined sweep signal, test of seismic channel data and geophone polarity by use of DSD returned signal through wire and wireless style.

它可对DPG信号、自定义扫描信号、地震道数据及检波器极性测试、通过有线或无线方式由DSD返回的信号进行分析。

34kb

The interaction between a silo and stored material is investigated by means of seismic response test and calculations.

通过地震反应试验和计算两种方式对贮仓与贮料相互作用进行了探讨。

47kb

The fixing of decorative stone and the seismic behavior of bracing structure were examined through test and then the safety of earthquake is able to be ensured.

通过试验,检验了装饰石材的固定方式和支撑结构的抗震性能,有助于保障装饰石材的抗震安全。

47kb

A system for distance monitoring and a seismic experiment controlling was introduced. This system was used to develop the method of a remote pseudo-dynamic test.

介绍了一个可以进行远程监视及控制的抗震试验系统,该系统主要用于拟动力试验方法的研究。

18kb

Simulated test verifies the interpretation on seismic profiles.

模拟试验验证了地震剖面解释结果。

43kb

Based on seismic lines, hydrocarbon source rock, lithology, thermal stream and test data, a two dimensional forward model of the basin has been made.

以地震主测线为格架,结合烃源岩、岩性、热流、测试分析资料为依据,采用正演法开展二维盆地模拟工作。

39kb

The method of shallow layer seismic image is used to test a reinforced concrete dam and the test results are comprehensively analyzed.

并对某钢筋混凝土大坝采用浅层地震映像法检测的实例结果进行了综合分析。

47kb

The developed laminar shear model box lays a firm foundation for the success of the test and can also be adopted in other tests for seismic geotechnical problems.

试验结果表明,所设计的叠层剪切变形模型箱不仅为本次试验获得成功打下了坚实的基础,还可以应用于其他岩土地震问题的试验研究。

53kb

Artificial damping boundary is adopted in seismic model test of arch dam on shaking table to simulate the radiation damping effect due to energy dissipation in infinitive foundation.

在振动台上进行拱坝动力模型试验时,设置人工阻尼边界,以模拟地震时地震动能量向无限远域地基逸散的地基幅射阻尼效应。

29kb

In the process of seismic data, seismic numerical modeling can be used to test some inverse methods.

在地震数据处理中,地震数值模拟计算出来的记录数据可以检验各种反演方法的正确性。

54kb

Based on the piers mode shape function, this paper studied the methodology of structure ductility coefficient by modal test and the procedure of the structures inelastic seismic force.

以桥墩的基本振型函数为基础,推导出基于试验动力参数的在役桥梁结构延性系数的计算公式,并给出了结构非弹性地震力的求解方法。

34kb

Common-used test method for delay of seismic apparatus had the problem that there were large errors in test results.

常用地震勘探仪器延迟时的测试方法存在测试结果误差较大的问题。

47kb

Using this method, we researched a synthetic discrimination method of nuclear test seismic monitoring with fuzzy logic illation, and listed its theory framework.

利用这种推理方法进行了地震事件模糊逻辑推理综合识别方法研究,给出了方法的框架。

43kb

The case study showed that by this method we will be able to decrease the population of suspicious seismic events in nuclear test seismic monitoring.

实例研究表明这种综合识别方法在核试验地震监测中有减少可疑事件数量的能力。

49kb

Accurately evaluating the clay particle content is of great significance to discriminating the seismic liquefaction by static sounding test or standard penetrating test.

运用静力触探试验和标准贯入试验进行地震液化判别皆用到粘粒含量这一指标,因此准确地测定粘粒含量具有重要意义。

34kb

The in-situ test results show that under seismic loading with magnitude 7, some in-situ soil layers could be liquefied.

试验结果显示,在研究区域内的可液化土层在7度地震烈度下有发生液化的可能性。

38kb

It's no doubt that the shaking table test provides the necessary groundwork to study seismic performance of pile groups of Bridges.

振动台试验无疑为可液化场地桥梁群桩抗震性能研究提供必要铺垫。

40kb

The tests include seismic wave excitation parameter test, observation system parameters test and seismic reflection data processing test.

试验内容包括地震波激发参数试验、观测系统参数试验和地震反射资料处理方法试验。

42kb

The seismic behaviors of reinforced concrete structure frame-supported short-leg shear wall structure are investigated in the thesis of the test.

试验重点研究了框支短肢剪力墙结构的延性、耗能性、刚度衰减特征,结构的屈服机制和破坏机制。

THE END
0.ISO/TR21141:2022木材结构连接测试标准解读深度解读ISO/TR 21141:2022技术报告,涵盖木材连接节点的屈服点、极限状态和延性系数测定方法。分析欧洲、北美和远东标准的异同,提供地震性能评估的关键参数确定流程,包含弹性刚度计算、包络曲线建模等核心技术要点。jvzquC41o0govyjfkc4dqv4uvctec{i134927?:6;;3227mvon
1.抗震性能参数化检测[CMA/CNAS/ISO]第三方检测机构强度检测:测定结构或构件在单调加载下的最大承载能力,强度参数是抗震设计的基础,确保结构具有足够的抗侧力强度以抵抗地震作用。 延性系数检测:计算结构或构件的极限位移与屈服位移的比值,延性系数反映结构变形能力,高延性结构在地震中能通过塑性变形耗能减少破坏。 jvzquC41yy}/{sxucp4dqv4skvgkkjseg1974<80jvsm
2.疲劳延性指数测试,检测机构检测方法 高周疲劳测试:通过施加高频低幅载荷,评估材料在大量循环下的疲劳性能,适用于长寿命应用场景。 低周疲劳测试:使用低频高幅载荷模拟短期高应力条件,检测材料在有限循环下的延性行为。 应变控制疲劳测试:以恒定应变幅值进行循环加载,分析材料的塑性变形和疲劳寿命关系。 jvzquC41yy}/dnnlkctkkjseg0ipo8vkvc5rk}f{cpmqkw4336;658
3.钢结构节点滞回性能试验(JGJ/T101),检测中心延性系数:评价节点在破坏前的变形能力。 破坏模式:观察节点在极限状态下的破坏形式。 循环次数:记录节点在特定荷载水平下的循环寿命。 荷载-位移关系:分析节点在不同位移下的荷载响应。 等效阻尼比:计算节点的等效阻尼性能。 强度退化:评估节点在反复荷载下的强度衰减。 jvzquC41yy}/dnnlkct{jxsizkt/exr1sv5yp8<::680
4.建筑结构节点静态压缩试验,检测中心压缩承载力,压缩变形量,弹性模量,屈服点荷载,极限承载力,破坏荷载,荷载位移曲线,应力应变关系,节点刚度,残余变形,应变分布,位移测量,荷载速率,变形速率,能量吸收能力,延性系数,强度折减系数,连接件强度,焊接强度,螺栓预紧力,锚固性能,混凝土抗压强度,钢筋屈服强度,节点区域应力集中,疲劳性能,蠕变性能,温度影响,湿度影响jvzquC41yy}/dnnlkct{jxsizkt/exr1sv5yp862:8871
5.ASTMD7989延性系数:ΔU,avg/ΔASD,avg≥ 11 参数计算基于ASTM E2126定义的平均包络曲线,且垂直承重构件必须保持重力荷载支撑能力。 工程应用建议 实施要点 测试方案设计:应涵盖预期应用中的关键变量(设计荷载、构造选项、材料变化等) 数据有效性:每个测试配置的重复试件数量应符合ASTM E2126第8.1条要求 混合使用:通过验证的替jvzquC41yy}/cwyrgfob0lto1uzbpmftf17:6A:;83<7/:50jvsm
6.建筑结构分析北检(北京)检测技术研究院第三方科研检测机构腐蚀速率测定:电化学法失重率≤0.01mm/year火灾后评估: 残余强度测试:抗压强度保留率≥70%、温度影响分级 热损伤分析:微观组织结构变化、热膨胀系数 烟气毒性残留:有害物质浓度限值抗震性能分析: 抗震能力评估:延性系数μ≥3.0、耗能能力(参照GB50011) 地震响应谱:设计加速度、位移需求比 隔震装置检测:位移容量、刚度衰减率地基与 jvzquC41yy}/ds~vguz/exr1dl0s}oe13753980jvsm
7.H型钢柱集中荷载强度实验,检测中心材料硬度:表面洛氏硬度测试 延性系数:破坏前变形容许能力的量化指标 刚度退化:循环荷载中刚度衰减规律 温度效应:不同环境温度下的承载力变化 焊接热影响区:焊缝周边材料性能测试 防腐涂层影响:表面处理对承载性能的作用 截面削弱系数:开孔或缺口导致的强度折减 jvzquC41yy}/dnnlkct{jxsizkt/exr1sv5yp8=:8880
8.基于性能设计方法论文11篇(全文)现行的公路桥梁抗震设计细则仅适用于跨度为150米以下的一般桥梁结构,因此对特殊的高墩大跨桥梁结构,探讨适当的抗震设计方显得相当重要。桥梁抗震的设计方法也是从地震灾害中不断总结经验,得到改进与发展,由起初的单一强度控制到强度、位移双标准控制,再到现在是多指标的结构性能控制,归纳起来,桥梁的抗震设计方法主要有基于强度设计 jvzquC41yy}/;B}wgunv0lto1y5jmn~|43956@q0jvsm
9.一种用于工程结构的抗震性能测试方法及系统专利根据所述震动用例的震动特征时序信息,对所述试验工程结构执行拟动力试验,获得试验工程结构反力时序信息; 对所述试验工程结构反力时序信息进行抗震性能映射,获得滞回耗能参数、层间位移角、强度退化系数、刚度退化系数和延性系数,设为第一抗震性能测试结果; 将所述第一抗震性能测试结果添加进所述第一抗震性能测试结果jvzquC41f0}bpofpifguc7hqo0io1yfvgpz0EW7247712?=22349
10.钢结构梁柱节点极限承载安全系数实验,检测中心极限承载力,屈服强度,抗拉强度,抗压强度,剪切强度,节点刚度,位移变形量,塑性转角,延性系数,疲劳性能,残余应力,焊缝质量,螺栓预紧力,摩擦系数,腐蚀程度,表面硬度,微观组织结构,裂纹扩展速率,应变分布,温度敏感性 检测范围 刚性连接节点,半刚性连接节点,铰接节点,焊接节点,螺栓连接节点,端板连接节点,角钢连接节点,T型钢jvzquC41yy}/dnnlkct{jxsizkt/exr1sv5yp8<435?0
11.ASTMC1609检测刚度退化测试:评估材料在循环荷载下的刚度变化。 延性系数计算:通过峰值荷载和初裂荷载计算延性系数。 疲劳性能测试:模拟长期荷载作用下的材料性能变化。 动态荷载试验:评估材料在冲击或振动荷载下的响应。 蠕变性能测试:测定材料在长期静载下的变形特性。 jvzquC41yy}/{sxujkj0lto1soucsncpek03;;6694ivvq
12.基于位移抗震设计方法6篇(全文)位移的抗震设计大致可分为以下三种方法:按延性系数设计的方法法、能力谱法和直接基于位移法。直接基于位移的设计方法更侧重于目标位移的实现过程, 即如何设计。由此可以得出以下结论:直接基于位移的抗震设计方法更能有效的实现基于性能的抗震设计思想。 3 高层建筑直接基于位移抗震设计方法 jvzquC41yy}/;B}wgunv0lto1y5jmn~fc4|1k?;0jvsm